“与光同行”IPT Workshop系列活动之三
   
     
     

 

“与光同行”IPT Workshop系列活动之三
当前位置:首页 > 学术交流 > 学术讲座 > “与光同行”I... ...

“与光同行”IPT Workshop系列讲座之一

 

题目:Printed Electronics and RFID

报告人:Prof. George Xiao(National Research Council, Canada)

主持人:郭团研究员

时  间:2016年9月23日(星期五)下午14: 30

地  点:曾宪梓科学馆四楼405会议室

 

报告摘要:

Printed electronics is using the printing techniques, such as flexography, gravure, inkjet, offset lithography and screen printing, to create electronic devices. It is an emerging technology and can be used to fabricate simple and low cost devices on any solid substrates such as paper, plastic, rubber, fabrics and etc. This makes printed electronics ideal for the fabrication of RFID inlays, and devices for wearable, IOT and disposable medical diagnosis applications.

This tutorial begins with the introduction of the printed electronics technology, its advantages and disadvantages and its major applications. The operation principle and procedures of printed electronics process are explained using the screen printing as the example, as it is the most mature and the most widely used printed electronics technique. Antenna is the most critical part of a RFID tag or reader. The tutorial will discuss how to fabricate high quality RFID antennas for various applications using the screen printing technique. The challenges and the solutions will be presented in the tutorial using the real cases as the examples, including the HF antennas for ID, wireless power transfer applications, and the UHF reader antennas. How to print other RFID components will also be presented in the tutorial, such as the battery, memory and sensors. Future directions in using printed electronics to create RFID based products will be discussed in the last part of this tutorial.

 

报告人简介:

Gaozhi (George) Xiao received the Ph.D. degree from Loughborough University of Technology (UK) in 1995. He has working experience from industries to academics. He was a RandD engineer and team leader in Chinese Aerospace Corporation from 1987 to 1992, a Research Fellow in Ecole National Superior des Mines de Paris from 1995 to 1997, a RandD engineer in JDS Uniphase from 1998 to 1999, a senior product development engineer and a R and D group manager in Zenastra Photonics from 1999 to 2001, a senior product designer in Lumenon Innovative Lightwave Technology from 2001 to 2002. In April 2002 he joined the National Research Council (NRC) of Canada as a research scientist. He is currently a senior Research Officer in the Institute for Microstructural Sciences at NRC. Dr Xiao is a senior member of IEEE Instrumentation and Measurement Society, a steering committee member of IEEE/OSA Journal of Lightwave Technology. He is also an adjunct professor of Carleton University.

 

欢迎广大师生参加!

光子技术研究所

2016年9月17日

暨南大学光子技术研究院 版权所有.Copyright 2012